When is builder's warranty insurance required?

Published June 2nd, 2024 by Justin Cannon

When the building contract is $16,000 or higher which means you have to cost for $1,500.

What spacings do I need for rooflites when I design a veranda?

Published June 2nd, 2024 by Justin Cannon

  You can have 1 every 500mm BUT you need to place the first one 1 m from the edge of the veranda. See below:

How close can I build to the boundary?

Published June 2nd, 2024 by Justin Cannon

200mm from the outside face of the veranda's gutter and the fence, which means that the veranda column will be 360mm off the fence.  If there is a pre existing timber deck under the area we need to build the structure then regardless of how far away the timber decking is to the fence our structure needs to be designed 1m away from the boundary. 

What spacings do I need for columns?

Published July 9th, 2024 by Justin Cannon

As a rough rule of thumb if you design your structures to have approx. no less than 5m between columns this will cover most scenarios. We can technically have the spacing higher but this will be decided by the trades managers at the trades measure up that happens after the job is sold.

Are building permits always required?

Published June 2nd, 2024 by Justin Cannon

Yes the only structure that would avoid a building permit is a freestanding structure under $5,000 in contract value. As soon as you attach a structure to a home a building permit is required. Some clients will be confused and claim they called the council or seen an article in a newspaper about permits not being needed for verandas BUT that will be

What makes the Stratco product different to other products in the market?

Published June 2nd, 2024 by Justin Cannon

What are the key things to remember about Timber Deck

Published July 12th, 2024 by Justin Cannon

We use ModWood and eco composite board and Probeam colorbond steel as the substructure. When we are to build a new timber deck we need to hvae 150mm clearance from the bottom of the supporting colorbond Pro Beam and the earth meaning the total room we need is approx 300mm from the top of the decking to the ground level. We tell the client what is ne

Are we able to build of easements?

Published June 2nd, 2024 by Justin Cannon

When you are at a home you will likely not know where the easement is so the best thing to do is just design what the client wants to achieve and bring the job in and let the Install a Veranda building permit team manage the process as part of the normal building permit process.  Sometimes you can build over an easement if there are no council or wa

What triggers the requirement for a fire modification certificate?

Published June 2nd, 2024 by Justin Cannon

If you design a structure that has the outside face of the veranda's gutter edge closer than 1m then Install a Veranda needs to organise a fire engineer to issue a fire modification certificate and you have to cost in $1,000.  The only time this does not apply is when there is a nature reserve, council owned land or corner block on the side that you

How does the Building Permit Process Work?

Published June 2nd, 2024 by Justin Cannon

When are risers brackets needed?

Published June 1st, 2024 by Justin Cannon

When the height of the main house guttering that you are attaching to is 2.3m or lower. The reason for this is once you install the permitter beam underneath the main home gutter you automatically lose 120mm then when you install our veranda roof you lose a futher 20mm per 1m of width. Example if you have a vernada roof that is 5m wide you lose a fu